You have to read 8 pages of warnings and specifications before reaching the first practical step. A one-page "Install in 2 Minutes" summary would save technicians a lot of time.
It says "tighten terminals securely" but does not list a torque value (e.g., 0.5 Nm). This leads to either loose connections (overheating) or stripped screw heads. ts1162 installation manual
The TS1162 accepts three types of triggers: You have to read 8 pages of warnings
| Switch | Function | Setting | Meaning | | :--- | :--- | :--- | :--- | | | Trigger Mode | OFF (Default) | Momentary – Relay activates while trigger is held. | | | | ON | Latching – First trigger toggles relay ON, second toggles OFF. | | SW2 | Output Polarity | OFF | Relay energizes on trigger. | | | | ON | Relay de-energizes on trigger (reverse logic). | | SW3 | Time Base | OFF | Time delay in seconds (1-255 seconds). | | | | ON | Time delay in minutes (1-255 minutes). | | SW4 | Auto-Off Enable | OFF | Relay stays ON until trigger is removed (momentary mode only). | | | | ON | Relay turns OFF after preset time, even if trigger held. | This leads to either loose connections (overheating) or
Identify a location with adequate ventilation and access to power.