: Verify your SoC (System on a Chip) is supported by checking the OpenIPC Hardware List .
OpenIPC Installation Guide: Transforming Proprietary IP Cameras into Open Systems
vi /etc/network/interfaces # Change dhcp to static: iface eth0 inet static address 192.168.1.50 netmask 255.255.255.0 gateway 192.168.1.1
: A USB-to-TTL (UART) adapter (e.g., CH341 or CP2102) is mandatory for initial flashing via the serial console.
: Verify your SoC (System on a Chip) is supported by checking the OpenIPC Hardware List .
OpenIPC Installation Guide: Transforming Proprietary IP Cameras into Open Systems
vi /etc/network/interfaces # Change dhcp to static: iface eth0 inet static address 192.168.1.50 netmask 255.255.255.0 gateway 192.168.1.1
: A USB-to-TTL (UART) adapter (e.g., CH341 or CP2102) is mandatory for initial flashing via the serial console.