EZ Update是一款华硕官方通过的固件升级工具，可以方便用户升级主板，显卡或者更新bios等，是华硕主板用户必备的工具。
EZ Update应用程序让您可以轻松地自动更新主板的软件、驱动程序以及BIOS版本。
通过这个程序，您可以手动更新BIOS，并选择自我检测（POST）时想要用来显示的启动图标。
请确认您的主板支持AI suite 3功能
下载地点：http://www.asus.com.cn/support/ 输入主板型号之后再【驱动程序和工具软件】->[OS]->[公用程序]进行下载
注意：若没有AI suite 3 可供下載那就说明主板不支持这个功能
开启AI suite 3 主选菜单(在AI suite 3 面板右上方)后依循硬盘进行操作
step 1.聽聽点击 "EZ Update"
step 2.聽 Check updates from internet:点击 "Check Now!"
step 3.聽 点击 "Connect" 来检查更新
step 4.聽 选择您想下载的BIOS版本
step 5.聽聽点击 "Update"
step 6.聽聽出现 Download and updates 对话框，点击 "OK"
step 7.聽 出现 Installed the items on your computer 对话框，点击 "OK"
step 8.聽 更新中，请稍等几分钟
step 9.聽聽点击 "OK"，然后系统将会自动重新开机
70KB / 03-27
系统其他
下载
21.5M / 02-01
游戏补丁
下载
231KB / 09-26
系统优化
下载Spreadtrum鈥檚 official Upgrade Download Tool, combined with the and a specific .pac firmware file , can flash keypad phones without a box. The catch? The phone must be in "download mode" (usually holding volume down while inserting USB). No box is needed because the tool uses official, unsigned FDL files. However, for dead boot (no preloader), UDT alone fails; one then needs a Frankenstein method: shorting CLK or CMD pin on the eMMC to force a low-level USB connection.
| Error | Meaning | Solution (No Box needed) | | :--- | :--- | :--- | | | Old DA file | Use a different version of SP Flash Tool (try v3.1 or v5.18) | | BROM ERROR: S_BROM_CMD_STARTCMD_FAIL | Driver conflict | Uninstall PC Suite software; install raw VCOM drivers | | Error: Phone not found (SPD Tool) | Wrong button combo | Try holding Power + Volume Up, or remove battery, press Vol Down, insert cable | | Checksum Fail | Corrupt firmware | Re-download firmware from a different source | | Phone vibrates then nothing | Dead battery | Charge the battery using a universal charger or another phone |
Tecno, Itel, Infinix, Micromax, Gionee, old Alcatel.
Nokia and Samsung feature phones require this method.
Spreadtrum鈥檚 official Upgrade Download Tool, combined with the and a specific .pac firmware file , can flash keypad phones without a box. The catch? The phone must be in "download mode" (usually holding volume down while inserting USB). No box is needed because the tool uses official, unsigned FDL files. However, for dead boot (no preloader), UDT alone fails; one then needs a Frankenstein method: shorting CLK or CMD pin on the eMMC to force a low-level USB connection.
| Error | Meaning | Solution (No Box needed) | | :--- | :--- | :--- | | | Old DA file | Use a different version of SP Flash Tool (try v3.1 or v5.18) | | BROM ERROR: S_BROM_CMD_STARTCMD_FAIL | Driver conflict | Uninstall PC Suite software; install raw VCOM drivers | | Error: Phone not found (SPD Tool) | Wrong button combo | Try holding Power + Volume Up, or remove battery, press Vol Down, insert cable | | Checksum Fail | Corrupt firmware | Re-download firmware from a different source | | Phone vibrates then nothing | Dead battery | Charge the battery using a universal charger or another phone |
Tecno, Itel, Infinix, Micromax, Gionee, old Alcatel.
Nokia and Samsung feature phones require this method.
