Hanover Dg3 Manual !exclusive! Here

This is the default mode where the screen updates in real-time. The digital dampening feature can be adjusted in the menu if the pressure source is pulsating. Peak Hold Mode

| Task | Frequency | Steps | |------|-----------|-------| | | Weekly | 1. Power down. 2. Remove dust from ventilation slots using a soft brush. 3. Wipe LCD with a lint‑free cloth (no solvents). | | Firmware Update | As released | 1. Download .bin file from Hanover portal. 2. Connect via USB. 3. Run the Update utility. 4. Do not power off during flashing. | | Electrical Inspection | Quarterly | Verify fuse integrity, tighten terminal screws, inspect for corrosion on I/O connectors. | | Backup Settings | Monthly | Export configuration file (JSON) to a USB stick; store off‑site. | | Full Calibration | Annually or after major mechanical work | Run Diagnostics → Calibration → Axis ; follow the step‑by‑step guide to align zero positions using a calibrated dial indicator. | Hanover Dg3 Manual

| Element | Description | |---------|-------------| | | Shows real‑time status (spindle rpm, feed rate, tool number) and menu prompts. | | Keypad | 12‑key numeric pad + Enter , Esc , Menu , Up/Down navigation keys. | | Status LEDs | Green – Power OK; Yellow – Communication active; Red – Fault/Alarm. | | Back‑light | Adjustable brightness via the Menu → Display → Backlight setting. | This is the default mode where the screen