If you lost your physical copy, here are three common scenarios:
Most users never read past page 5, but the back of the manual contains "Pr2" (Level 2 parameters). To access these, you must enter a secret password. dixell xw60ls manual
| Parameter | Description | Typical Range | Recommended Setting | |-----------|-------------|---------------|----------------------| | | Control setpoint | LS to US | 2°C (36°F) fridge / -18°C (0°F) freezer | | Hy | Differential (hysteresis) | 0.1 to 25.0°C | 2.0°C | | LS | Minimum setpoint limit | -50°C to US | -30°C (freezer) / 0°C (fridge) | | US | Maximum setpoint limit | LS to 110°C | 8°C (fridge) / 0°C (freezer) | | OdS | Output delay at startup | 0 to 255 min | 1 min | | AC | Anti-short cycle delay | 0 to 60 min | 5 min | | dtE | Defrost termination temp | -50 to 50°C | 8°C (fridge) / 15°C (freezer) | | idF | Interval between defrosts | 1 to 99 hrs | 6 hrs (fridge) / 8 hrs (freezer) | | MdF | Max defrost duration | 1 to 255 min | 20 min (fridge) / 30 min (freezer) | | Fdt | Drip time after defrost | 0 to 60 min | 5 min | | FSt | Fan start delay after defrost | 0 to 255 min | 2 min | | Fnc | Fan operation mode | 0, 1, 2 | 2 (run with compressor, off during defrost) | | ALC | Alarm type | 0=absolute, 1=relative | 0 | | LAL | Low temperature alarm | -50 to ALU | -10°C (fridge) / -25°C (freezer) | | UAL | High temperature alarm | LAL to 150°C | 10°C (fridge) / -5°C (freezer) | If you lost your physical copy, here are
The XW60LS features a standard 3-digit LED display and four navigation keys. Understanding these keys is essential for programming. Understanding these keys is essential for programming
New DIXELL XW60L-4N0C0N Controller 120V Refrigeration Controller