For flux core, drop voltage by one position and increase wire speed by ~1.5 steps.
| Component | Action | Frequency | |-----------|--------|------------| | Welding torch liner | Blow out with compressed air | Every 5 spools | | Contact tip | Replace if hole is oval | Every 2-3 spools | | Drive rolls | Clean dust and metal flakes | Monthly | | Air intake louvers | Vacuum out dust | Monthly | | Ground clamp | Disassemble and file jaws | Every 3 months | | Internal electronics | Check for loose connections | Annually |
Your will show a panel with two primary dials:
: Accepts 0.6mm and 0.8mm solid wire (for gas) or 0.9mm to 1.0mm flux-cored wire (for gasless). clarkeservice.co.uk Operation & Setup Summary Safety First
