Gear One Pa2400 User Manual __full__ — Free & Safe
| Specification | Value | |---------------|-------| | | 2 (Stereo) | | Power (8Ω stereo) | 400W per channel | | Power (4Ω stereo) | 700W per channel | | Power (8Ω bridged) | 1400W (mono) | | Frequency Response | 20Hz – 20kHz ±0.5dB | | Input Sensitivity | 0.775V or 1.4V (selectable) | | Input Impedance | 20kΩ (balanced) / 10kΩ (unbalanced) | | Protection | Short circuit, thermal, DC, overcurrent | | Cooling | Dual variable-speed fans (rear-to-front airflow) | | Dimensions | 19" x 3.5" (2U rack) x 15" |
The amplifier can be switched between Stereo (L/R mains), Main/Monitor (one amp for the audience, one for the stage), or Bridge Mono (single high-power output). gear one pa2400 user manual
Monitor the bi-color Signal/Peak LEDs on each channel. Aim for a green signal; if the LED turns red, reduce the gain or channel level to prevent distortion. | Specification | Value | |---------------|-------| | |
When searching, use quote marks – "Gear One PA2400" manual PDF – to narrow results. When searching, use quote marks – "Gear One
2 x 400W at 4 Ohms; bridgeable for 800W mono operation. Channels: 8 input channels. Inputs: 7 Mic/Line inputs with XLR and 1/4" connectors. Phantom Power: 15V available for condenser microphones.
Yes. Set rear mode to PARALLEL , then feed same mono signal to both inputs. Each channel still has independent volume, but the input signal is shared. Do NOT use Parallel if you need stereo.
