Coppercam Tutorial

The software requires specific layers to be loaded and aligned correctly to ensure accurate milling.

: A larger bit (e.g., 0.8mm or 1mm) if you wish to remove all excess copper. Cutting : A robust 1mm to 2mm cutter for the board outline. coppercam tutorial

Before milling a real copper board, do a dry run with the spindle off. The software requires specific layers to be loaded

Before generating paths, you must define your milling bits. For isolation routing, two tools are essential: including the Tool Diameter (e.g.

: Set the "Isolation Routing" parameters, including the Tool Diameter (e.g., 0.2 mm or 0.25 mm) and the number of contours required to fully isolate traces.